Feeder Installation

Please Select an option below for more details or click here to download a printable version.




Click to View Product Video


Mounting to Wood Fence with Optional Stainless Steel Brackets:
We have an optional Stainless Steel Fence/Wall Bracket so that the feeder can be secured to a horizontal board or fence rail. We suggest you mount the feeder near a post to minimize movement.

You will need the following tools:
  • Stainless Steel Fence/Wall Bracket
  • Electric Drill and/or Screwdriver
  • Lag Bolts and/or Machine Bolts
  • Tape Measure
  • Pencil
Instructions:
  1. The distance from the support surface of the Z-bracket to the mounting holes on the fence bracket is 14”. Lay out this distance between the fence fails, so that the fence/wall bracket and the Z-bracket will mount securely.
  2. After your layout, mount the Z- bracket first to the fence/wall with one of the wood screws.
  3. Plumb the Z-bracket and install the second wood screw.
  4. Measure up from Z-bracket 14”and mark.
  5. Center feeder bracket above Z-bracket on 14” mark, level bracket and mark the 2 mounting holes.
  6. Mount bracket with proper lag bolts or machine bolts (not supplied) to fence or wall.
  7. Take disk out of feeder and set feeder on Z-bracket.
  8. Put ½” carriage bolt through mounting holes from inside feeder, and then through holes in mounting bracket.
  9. Thread on ½” nut and tighten snuggly.